Woven Rovings

- WR Series

Fibertech Woven Rovings are stabilized industrial fiber-glass fabrics produced by weaving direct rovings in state of the art Dornier looms. These woven rovings are used to reinforce various types of resins such as polyesters, epoxies, vinylesters, etc. They provide better stability and handling than the traditional woven rovings in both cutting and mold placement.

Product / Property	Unit	WR1-270	WR1-300	WR1-500S	WR1-600S	WR1-800S	Tolerance
Density	g/m²	270	300	500	600	800	± 10 %
Fabric Construction		Plain weave	Plain weave	Plain weave	Plain weave	Plain weave
Warp, TexWeft, Tex	per 10 cm / Tex	47,300 42,300	48,300 49,300	23 / 1150 19 / 1150	27 / 1150 25 / 1150	19.5 / 2400 16 / 2400	± 5 %
Thickness	mm	0.13	0.13	0.55	0.55	0.85
Moisture content	%	0.02	0.02	0.02	0.02	0.02	0.2% max
Width**	cm	125	125	125	125	125
Standard length	m	115	100	75	60	44
Standard roll weights	kgs	38	38	47	47.5	47

The above information includes typical values of Fibertech products and this information is provided in good faith. However, Fibertech is unable to accept any responsibility in respect to factors which are outside our knowledge or control. Fibertech reserves the right to change the above data and specifications without prior notice.

Please contact our Technical Support Department for more technical information.