Woven Fabrics

- WF Series

Fibertech woven fabrics are produced by weaving high quality twisted and plied yarns in state-of-the-art looms. The yarns are coated with special sizing chemicals to withstand the high speeds of beaming and weaving, and impart excellent mechanical properties to the finished product. These woven fabrics form the base reinforcement for coatings which includes both the thermoset and thermoplastic type of resins.

Properties	Unit	W110	W114	W141	W201	W100	Test Method
Fiber type	-	Glass	Glass	Glass	Glass	Glass	-
Filament type	-	EC6	EC6	EC6	EC6	EC6	-
Weave	-	Plain	Plain	Plain	Plain	Plain	-
Mass per unit area (nominal)*	g/m2	165	300	400	500	650	ASTM D 3776-96
Yarn construction Warp Weft	Tex	34 x 2 34 x 2	68 x 2 68 x 2	68 x 3 68 x 3	68 x 2 X 2 68 x 2 X 2	136 x 3 136 x 3	-
Yarn Count Warp Weft	Yarns/10cm	165 145	116 100	95 95	97 75	80 70	ASTM D 3775 - 96
Thickness (minimum)	mm	0.15	0.27	0.35	0.45	0.55	ASTM D 1777 - 96
Width (minimum)*	M	3.1	3.1	3.1	3.1	3.1	ASTM D 3774 - 96

* Other densities and widths can be made upon specific request.

The above information is provided in good faith. However, Fibertech is unable to accept any responsibility in respect to factors which are outside our knowledge or control. Fibertech reserves the right to change the above data and specifications without prior notice.

Please contact our Technical Support Department for more technical information.