Structural Membranes

FIBERTOP^® structural membranes are made from high strength glass fiber woven fabrics, coated with PTFE - a material mixture well-known for its excellent dimensional stability, longevity and light weight. This material gives engineers and architects an exceptional freedom of design for all kinds of buildings and shade structures. Furthermore, these fabrics are not affected by extreme weather conditions, they are fire resistant, energy efficient and their non-stick properties make them substantially self cleaning.

Click to enlarge

TYPICAL PROPERTIES	FIBERTOP^®
TYPICAL PROPERTIES	1102	T300	T400	2018	1008	2028	1028
Glass	EC6	EC6	EC6	EC6	EC6	EC3	EC3
Coating Type	PTFE	PTFE	PTFE	PTFE	PTFE	PTFE	PTFE
Nominal Weight (g/m2)	530	660	850	1150	1380	1250	1500
Nominal Thickness (mm)	0.29	0.41	0.51	0.7	0.8	0.78	0.9
Breaking Strength (N/5cm / ib./in.) Warp Weft	2950 / 337 3170 / 362	3860 / 440 322 / 368	4920 / 560 4480 / 510	5250 / 600 3940 / 450	7004 / 800 6130 / 700	7004 / 800 5690 / 650	8580 / 980 7987 / 910
Trapezoidal Tear (N / lb.) Warp Weft	102 / 23 98 / 22	160 / 37 160 / 37	230 / 52 220 / 50	240 / 55 265 / 60	444 /100 444 /100	400 /90 400 / 90	533 / 120 667 / 150
Adhesion (N/5cm / lb./in.)		35 / 4	60 / 7	88 / 10	88 / 10	123 / 14	140 / 16

The above information includes typical values of FIBERTOP^® products and this information is provided in good faith. However, Fibertech is unable to accept any responsibility in respect to factors which are outside our knowledge or control. Fibertech reserves the right to change the above data and specifications without prior notice.

FIBERTOP^® is the registered trademark of Fibertech for its coated glass fiber fabrics.

Please contact our Technical Support Department for more technical information.