Separator Fabrics

FIBERTOP^® separator fabrics are PTFE coated glass fabrics designed for use as release fabrics between discs (abrasives, etc) during curing. They offer easy release due to their low friction and excellent non-stick properties. FIBERTOP^® separator fabrics eliminate platen cleaning and allow the use of high production temperatures.
	Click to enlarge

TYPICAL PROPERTIES	FIBERTOP^®
TYPICAL PROPERTIES	UNIT	D270	D370
Glass		EC	EC
Coating Type		PTFE	PTFE
Nominal Weight	g/m2	470	620
Nominal Thickness	mm	0.31	0.42
Breaking Strength Warp Weft	(N/5cm / ib./in.)	410 420	540 430
Trapezoidal Tear Warp Weft	(N / lb.)	28 35	35 40

The above information includes typical values of FIBERTOP^® products and this information is provided in good faith. However, Fibertech is unable to accept any responsibility in respect to factors which are outside our knowledge or control. Fibertech reserves the right to change the above data and specifications without prior notice.

FIBERTOP^® is the registered trademark of Fibertech for its coated glass fiber fabrics.

Please contact our Technical Support Department for more technical information.